Swage Nickle Copper 4.7mm Wire

Fully annealed during processing, ensuring maximum penetration of copper into the wire rope
"Figure-8" cross section directs the material properly during swagging
Burr-free inside profile prevents fraying of wires during insertion
Long taper on the opposite end to the thimble prevents "pinching" of the wire rope, extending life
Nickel plating reduces electrolytic corrosion of the splice

Wire Diameter	Recommended Swagged Sleeve Finished Size	Weight
4.7mm	11.8mm Diam.	23g

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Suncity Motorcycles’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Suncity Motorcycles’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 1/69 Flores Road, GERALDTON, WA, 6530, AU. Our ABN is 44 774 457 482 . The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

SKU	JPW-RM569
Brand	Riley
Shipping Weight	0.0200kg
Shipping Width	0.020m
Shipping Height	0.010m
Shipping Length	0.030m

Swage Nickle Copper 4.7mm Wire

Shipping Calculator

Thimble 5mm Dia Rope Groove

Channel Section Jib Rack 6mm Pin 178mm

Sheet Guide Cleat Stainless Steel

Spare Shackle Pin for RM22 6.4mm Slotted Pin

Saddle S/S 5mm Plain Holes 35mm Centres

RM532SP Standard 4mm Slotted Pin

RM532P Standard 4mm Flat Head Pin

Shackle Pin 4.7mm Flat Head for RM538 Dee

Adjusting Pin 6.4mm Dia Slotted Head

Yoke - Mast 57mm Diameter

Be The First To Review This Product!

Categories

Be The First To Review This Product!

Swage Nickle Copper 4.7mm Wire

Enquiry Form

Categories

Filter by Stock

Filter by Price Range

Terms & Conditions

Privacy Policy